Detection Systems DS7060 Especificações Página 46
- Página / 89
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
DS7400Xi Ver. 3+ Reference Guide Copyright © 1995-96 Detection Systems, Inc. Page 46
21.21 General Code “Arm Only” Programming: Program Address (0198-0201)
0
1
General Code can Arm, Disarm, and Bypass
Select Option DD
General Code can Arm and Bypass
3
General Code can Arm
2
General Code can Arm and Disarm
Data Digit 1 Data Digit 2
Partition 5 Partition 6
Program Address 0200
Data Digit 1 Data Digit 2
Partition 7 Partition 8
Program Address 0201
Data Digit 1 Data Digit 2
Partition 1 Partition 2
Program Address 0198
Data Digit 1 Data Digit 2
Partition 3 Partition 4
Program Address 0199
Example:
To program a General Authority level to be able to Arm
and Bypass zones he is not able to Disarm in Partition 1.
Data Digit 1 = [1], Data Digit 2 = [0].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [0] [1] [9] [8] (Data Digit 1)
Enter Data Digit 1: [1]
Enter Data Digit 2: [0]
Enter the pound key: [#]
Program the next Address, Program a different
Address, or Exit the Programmer’s Mode.
This allows for a user with a General Authority level to Arm and Bypass zones he is not able to Disarm.
See System Overview (section 6.1.3) for further details.
12.22 Arming Warning Programming: Program Addresses (0202-0205)
Example:
To program the keypads in Partition 1 to be audible during exit delay
and the keypads in Partition 2 not to be audible during exit delay.
Data Digit 1 = [4], Data Digit 2 = [0].
Enter the Programmer’s Mode: [9] [8] [7] [6] [#] [0]
Enter the Program Address: [0] [2] [0] [2]
Enter Data Digit 1: [4]
Enter Data Digit 2: [0]
Enter the pound key: [#]
Program the next Address, Program a different Address, or Exit the
Programmer’s Mode.
DD
Partition 1
4
No Keypad Sounder during Exit Delay
Data Digit
12
PA 0202
Keypad Sounder during Exit Delay
0
DDPartition 2
4
No Keypad Sounder during Exit Delay
Keypad Sounder during Exit Delay
0
DDPartition 5
4
No Keypad Sounder during Exit Delay
Data Digit
12
PA 0204
Keypad Sounder during Exit Delay
0
DDPartition 6
4
No Keypad Sounder during Exit Delay
Keypad Sounder during Exit Delay
0
DD
Partition 3
4
No Keypad Sounder during Exit Delay
Data Digit
12
PA 0203
Keypad Sounder during Exit Delay
0
DD
Partition 4
4
No Keypad Sounder during Exit Delay
Keypad Sounder during Exit Delay
0
DD
Partition 7
4
No Keypad Sounder during Exit Delay
Data Digit
12
PA 0205
Keypad Sounder during Exit Delay
0
DD
Partition 8
4
No Keypad Sounder during Exit Delay
Keypad Sounder during Exit Delay
0
Arming Warning programming defines whether the keypad will be audible
during the exit delay period. If programmed, the keypad sounder will acti-
vate once every 5 seconds during the exit delay. At 10 seconds and 5 sec-
onds remaining, the keypad sounder will activate 3 times.
- Reference Guide 1
- Control/Communicator 1
- Table of Contents 2
- 1.0 Specifications 4
- 1.17 Standby Current Load 5
- 1.18 Options 5
- 2.0 Enclosure Installation 7
- 3.0 Control Terminal Wiring 8
- 4.0 Hardware Layout Example 9
- 5.0 System Worksheet 10
- 11
- Zone Location and Notes 12
- Zn Funct. 1 12
- 2, KitchenSZ 12
- 6.0 System Overview 14
- 7.0 Glossary 14
- 7.3 Zone Programming 16
- 7.4 Output Programming 16
- 7.13 Report Programming 18
- 7.16 FCC Compliance Notice 19
- 8.3 Changing the Date 22
- Enter a PIN 23
- Enter [9] [9] 23
- Arm in nn Hours 23
- # to accept 23
- Enter a [1] 24
- Enter the partition number 24
- Press [#] to exit 24
- Duress Code + [Off] 25
- 8.11 Emergency Keypad Alarms 26
- 8.12 Fire Safety 26
- 8.13 Testing 27
- PIN + [#] [8] [3] 28
- PIN + [#] [8] [6] 28
- PIN + [#] [8] [7] 29
- PIN + [System Reset] 29
- 9.0 The Master Keypad 30
- 9.4 Single Partition Mode 31
- Feature 1 32
- 0 1 2 3 4 5 6 32
- Feature 2 32
- Feature 3 32
- Enter the Data Digit as a: 35
- DDSelect Option 35
- Data Digit 35
- Select Option DD 36
- Data Digit 2 41
- Ground Fault Detect Off 42
- Ground Fault Detect On 42
- Data Digits 50
- Receiver 52
- Master Code PIN Number 53
- Program Address 0534 53
- Call-Out Hour 57
- Call-Out Minute 57
- CHEMI CAL 58
- Zone 8 Zone 6 62
- U. L. Application 64
- 13.4.1 Local Burglary Alarm 66
- 13.5 Commercial Fire Alarm 67
- DS7400Xi 68
- Reports with Restorals 69
- Reports without Restorals 70
- 15.1 SIA Format 73
- 15.1 SIA Format (Continued) 74
- 15.2 Contact I.D Format 75
- See 9.18 76
- Error Displays 76
- 17.0 Troubleshooting Guide 78
- 17.2 Reporting Problems 79
- 17.3 Zone Problems 79
- 17.4 General System Problems 80
- 18.0 Program Addresses 84
- PRODUCT UPDATE 89
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Detection Systems DS7060
(2 páginas)Pro'sKit Multimetry uživatelské příručky
Seznam produktů Pro'sKit Multimetry obsahuje 5 uživatelské příručky pro 5 modelů. Všechny uživatelské příručky pdf jsou k dispozici ke stažení nebo prohlížení online.
Comentários a estes Manuais